Filter
Top Products
8-2
DATE & TIME
UNIT TELEPHONE #
UNIT NAME
TX TERMINAL ID
TTI POSITION
TELEPHONE # MARK
SCAN CONTRAST
OFFHOOK ALARM
VOLUME CONTROL
LINE MONITOR VOL
CALLING VOLUME
ALARM VOLUME
KEYPAD VOLUME
RX CALL LEVEL
TEL LINE TYPE
R-KEY SETTING
PSTN
PBX: ACCESS TYPE
ACCESS NUMBER
AUTO VOICE DIAL
–
–
–
ON/OFF
INSIDE IMAGE/
OUTSIDE IMAGE
TEL/FAX
STANDARD/DARKER/
LIGHTER
ON/OFF
–
0 (off)/1/2/3
1/2/3
0 (off)/1/2/3
0 (off)/1/2/3
STANDARD/HIGH
TOUCH TONE/
ROTARY PULSE
PSTN/PBX
–
PREFIX/HOOKING
–
ON/OFF
USER SETTINGS
Name Description Settings
Set the date and time (24-hour clock) using the numeric
buttons.
Enter your fax number using the numeric buttons.
This is the name that appears at the top of each fax page
you send (see p. 2-6).
This option sets the parameters for the identification header
that appears on every page you send.
Select the position of the TTI.
Select the icon for the fax number.
Set the density of the reproduction.
Enable/disable the off hook alarm. The alarm alerts you that
the handset is not seated properly in its cradle.
Set the volume of the fax sounds.
Set the volume of the line monitor (sound during dialling).
Set the volume of the ring produced when the fax detects a
voice call during FAX/TEL switchover.
Set the volume of the error alarm sound.
Set the volume of the keypad.
Set the ring tone.
Set the dialling method the fax uses to match the type of
phone line you have.
Set the type of PBX through which your fax is connected.
Your fax is connected to an outside line.
Your fax is connected through a PBX.
If you select PREFIX, you can enter an outside line number of
up to 19 digits.
Enable/disable automatic dialling for UCanTalk.