Filter
Top Products
7-1
7
USING THE BUILT-IN ANSWERING MACHINE (TAM MODE) (FAX-B140 only)
Before you use TAM MODE, you must record an outgoing message. Use the microphone on the
operation panel to record your outgoing message. Only one outgoing message, no longer than 20
seconds, can be recorded.
Types of messages that can be recorded ______
OUTGOING MESSAGE: Answering machine message
ALT OUTGOING MSG: Answering message only, used when the recording time is set to 0 or
the memory is full. Caller cannot leave a message.
VOICE MEMO: See p. 7-6.
FAXTEL MESSAGE:Message played when the Fax/Tel mode is set.
FORWARDING MSG:Message played when any new telephone messages are forwarded to a
forwarding number.
Recording the outgoing message ______________
To record another type of message, select the type of message you want to record in step 1, and then
follow the procedure below to record it.
Recording the outgoing message
USING THE BUILT-IN ANSWERING MACHINE (TAM MODE)
(FAX-B140 only)
1 Use [ 3] or [4] to select OUTGOING MESSAGE.
2 Press [Record] and speak into the microphone to record your outgoing message.
The remaining recording time is displayed on the LCD.
-or-
Press [Start/Copy], use [3] or [4] to select RECORD and press [Start/Copy] again. Then speak
into the microphone to record your outgoing message.
TIME LEFT 19
3 Press [Stop] twice when recording is finished.
You can record an alternative outgoing message, fax/telephone switching message or forwarding
message by selecting the appropriate option in step 1 above and then continuing on to steps 2 and 3.
n
You cannot delete the OUTGOING MESSAGE. To record a new outgoing message, repeat steps 1
to 3 above. The old outgoing message will be automatically deleted when you record your new
message.
7