Filter
Top Products
1-52
MVS-8000SF
1-8. Checks on Completion of Installation
<LED>
D1, D2, D3 (A-6) : MY-CPU status LED
Status indication of the CPU on the MY-102 board.
D201 (A-5) :
++
++
+12 V
+12 V power supply status indication.
Lit when the +12 V power is supplied.
If this LED does not light, the fuse may have blown.
D202 (A-5) :
++
++
+3.3 V
+3.3 V power supply status indication.
Lit when the +3.3 V power is supplied.
D203 (A-5) :
++
++
+1.8 V
+1.8 V power supply status indication.
Lit when the +1.8 V power is supplied.
10. MY-102 board (MKS-8440HD/SD/M)
AB C DE F GH J K L MN P R
1
2
3
4
5
6
7
8
9
10
11
12
13
D3
D2
D1
S202
D201
D202
D203
S201
CN12
CN14
E121
E124
E132
E131TP706TP705
TP704
TP904
TP905
TP906
E123
TP203
TP204
E122
E129
E508
TP504
TP507
TP505
TP506
E601
E801
E1001
E130
G
F
E
D
C
B
A
654321
D12
D18
D19
D10
D13
D14
D15
D16
D17
SW2
SW1
CPU-DR
Module
A side/Component side
<Switch>
S201 (A-5) : MY-CPU reset switch
Pressing this switch initializes the CPU on the MY-102
board.
S202 (A-5) : MONITOR reset switch
The reset switch that is used to reset the monitor during
maintenance through the terminal.
<Connector>
CN12 (A-8) : ISP common connector
Used only for production in the assembly factory. Used for
program writing into the JTAG device with ISP.
CN14 (A-7) : TERMINAL pin
This pin is connected to the CPU control terminal and used
during maintenance.
Conforms to RS-232C.