Filter
Top Products
67
GB
Printing from your computer
Installing the printer driver
Install the printer driver contained on the supplied CD-ROM to your
computer
.
1 Make sure that the printer is not connected to the computer.
2 Turn on your computer and start Windows.
•When installing or uninstalling the software in Windows
®
2000
Professional, log on Windows as the user name of “Administrator” or
“Power user”.
•When installing or uninstalling the software in Windows
®
XP
Professional/Home Edition, log on as a user name with the “Computer
administrator” user account.
Notes
•Be sure to close all running programs before installing the software.
•The dialog boxes in this section are those in Windows XP Professional, unless
otherwise specified. The installation procedures and the dialog boxes shown
differ depending on the operation system.
3 Insert the supplied CD-ROM
into the CD-ROM drive of your
computer and double-click
“Setup” in the CD-ROM.
Notes
•If you connect the printer to your computer before installing the driver, the
dialog box to request the driver is displayed. If this occurs, click “Cancel” to
close the dialog box. Then remove the printer from your computer and redo the
installation procedures.
•If you cancel the installation midway, do the installation procedures from the
step 3.
•If the installation fails, remove the printer from your computer, restart your
computer, and then do the installation procedures from the step 3.
Continued