Filter
Top Products
- Subnet Mask - The Subnet Mask is used for the WAN IP
address, it is usually 255.255.255.0
- Default Gateway - Enter the gateway into the box if required.
- Primary DNS - Enter the DNS Server IP address into the boxes
if required.
- Secondary DNS - If your ISP provides another DNS server,
enter it into this fi eld.
After you complete the above, click Next, the Wireless settings
page will appear, shown in fi gure 9.
In this page, you can confi gure the following wireless
parameters:
- Wireless Radio - indicates whether the Access Point feature of
the router is enabled or disabled. If disabled, the WLAN LED on
the front panel will not be lit and the wireless stations will not be
able to access the router. If enabled, the WLAN LED will be lit up
and wireless stations will be able to access the router.
- SSID - Enter a value of up to 32 characters. The same SSID
must be assigned to all wireless devices on your network. The
default SSID is TP-LINK. This value is case-sensitive. For
example, TP-LINK is NOT the same as tp-link.
ENGLISH
ENGLISH-12
Fig. 9