Steren COM-820 Network Router User Manual


 
CONFIGURING THE ROUTER
This chapter describes each web page’s key functions.
After your successful login, you can con gure and manage the
router. There are ten main menus on the left of the web-based
utility. Submenus will be available after you click one of the main
menus. The ten main menus are: Status, Quick Setup, Network,
Wireless, DHCP, Forwarding, Security, Static Routing, DDNS
and System Tools. On the right of the web-based utility, there are
the detailed explanations and instructions for the
corresponding page. To apply any settings you have altered on
the page, please click the Save button.
There are the detailed explanations for each web page’s key
functions below.
Status
The Status page displays the router’s current status and
con guration. All information is read-only.
1. LAN
This eld displays the current settings or information for the LAN,
including the MAC address, IP address and Subnet Mask.
2. Wireless
This eld displays basic information or status for wireless
function, including Wireless Radio, SSID, Channel, Mode,
Wireless MAC address and IP address.
3. WAN
These parameters apply to the WAN port of the router, including
MAC address, IP address, Subnet Mask, Default Gateway, DNS
server and WAN connection type. If PPPoE is chosen as the
WAN connection type, the Disconnect button will be shown here
while you are accessing the Internet. You can also cut the
connection by clicking the button. If you have not connected to
the Internet, just click Connect to establish the connection.
4. Traf c Statistics
This eld displays the router’s traf c statistics.
ENGLISH
ENGLISH-14