Filter
Top Products
i. Sometimes the connection cannot be
disconnected although you specify a time to Max
Idle Time, since some applications is visiting the
Internet continually in the background.
ii. If you are a Cable user, please confi gure the router
following the above steps.
2. How do I confi gure the router to access Internet by
Ethernet users?
1) Login to the router, click the “Network” menu on the
left of your browser, and click “WAN” submenu. On the
WAN page, select “Dynamic IP” for “WAN Connection
Type”, fi nish by clicking “Save”.
2) Some ISPs require that you register the MAC Address
of your adapter, which is connected to your cable or DSL
modem during installation. If your ISP requires MAC
register, login to the router and click the “Network” menu
link on the left of your browser, and then click “MAC
Clone” submenu link. On the “MAC Clone” page, if your
PC’s MAC address is proper MAC address, click the
“Clone MAC Address” button and your PC’s MAC
address will fi ll in the “WAN MAC Address” fi eld. Or else,
type the MAC Address into the “WAN MAC Address”
fi eld. The format for the MAC Address is
XX-XX-XX-XX-XX-XX. Then click the “Save” button. It
will take effect after rebooting.
i. Sometimes the connection cannot be
disconnected althou
g
h
y
ou specif
y
a time to Ma
x
Idle Time, since some applications is visitin
g
the
Internet continuall
y
in the back
g
round
.
ii. If
y
ou are a Cable user, please confi
g
ure the router
followin
g
the above steps
.
ENGLISH
ENGLISH-75