Steren COM-820 Network Router User Manual


 
- Enable Wireless Router Radio - The wireless radio of this
Router can be enabled or disabled to allow wireless stations
access. If enabled, wireless stations will be able to access the
router, otherwise, wireless stations will not.
- Enable SSID Broadcast - If you select the Enable SSID
Broadcast checkbox, the Wireless Router SSID will broadcast its
name (SSID) on the air.
- Enable Wireless Security – The wireless security function can
be enabled or disabled. If disabled, the wireless stations will be
able to connect the router without encryption. It is strongly
recommended that you choose this option to encrypt your
wireless network. The encryption settings described below.
- Authentication Type - You can select one of the following
authentication types:
• WEP - Select WEP authentication type based on
802.11 authentications.
• WPA-PSK/WPA2-PSK - Select WPA/WPA2
authentication type based on pre-shared passphrase.
• WPA /WPA2 - Select WPA/WPA2 authentication type
based on Radius Server.
- Authentication Option - You can select one of the following
authentication options:
• When you select WEP for authentication type you can
select following authentication options:
• Automatic - Select Shared Key or Open System
authentication type automatically based on the wireless
station request.
• Shared Key - Select 802.11 Shared Key authentication.
• Open System - Select 802.11 Open System
authentication.
• When you select WPA-PSK/WPA2-PSK as an
authentication type you can select Automatic, WPA
ENGLISH
ENGLISH-31