Filter
Top Products
Incoming Protocol - The protocol used for Incoming
Ports Range, either TCP or UDP, or ALL (all protocols
supported by the router).
Status - The status of this entry either Enabled or
Disabled.
To add a new rule, enter the following data on the Port
Triggering screen.
1.- Click the Add New button.
2.- Enter a port number used by the application when it
generates an outgoing request.
3.- Select the protocol used for Trigger Port from the pull-down
list, either TCP, UDP, or All.
4.- Enter the range of port numbers used by the remote system
when it responds to the PC’s request.
5.- Select the protocol used for Incoming Ports Range from the
pull-down list, either TCP or UDP, or All.
6.- Select the Enable checkbox to enable.
7.- Click the Save button to save the new rule.
There are many popular applications in the Popular Application
list. You can select it, and the application will fi ll in the Trigger
Port, incoming Ports Range boxes and select the Enable
checkbox. It has the same effect as adding a new rule.
To modify or delete an existing entry:
1.- Click the Modify in the entry you want to modify. If you want to
delete the entry, click the Delete.
2.- Modify the information.
3.- Click the Save button.
ENGLISH
ENGLISH-46