Steren COM-820 Network Router User Manual


 
FIREWALL
Using the Firewall page (shown in gure 41), you can turn the
general rewall switch on or off. The default setting for the switch
is off. If the general rewall switch is off, even if IP Address
Filtering, DNS Filtering and MAC Filtering are enabled, their
settings are ineffective.
- Enable Firewall - the general rewall switch is on or off.
- Enable IP Address Filtering - set IP Address Filtering is enabled
or disabled.
There are two default ltering rules of IP Address Filtering, either
Allow or Deny passing through the router.
Fig. 41
ENGLISH
ENGLISH-50