Sun Microsystems 816-7727-10 Server User Manual


 
6 Sun Fire V440 Server Installation Guide July 2003
“Secure the Cords and Cables to the Cable Management Arm” on page 25
“Install Optional Components” on page 28
“Connecting the Cords and Cables” on page 29
“Connect the Power Cords to the Server” on page 30
“Connect Twisted-Pair Ethernet Cables” on page 32
“Restore the Cabinet” on page 34
For a detailed list of 4-post cabinet requirements, turn to the section, “4-Post Cabinet
Requirements” on page 52.
Checklist of 4-Post Rackmounting Tasks
Step Task Refer to This Section
1 Install the inner glides on the
chassis.
“Attach the Inner Glides to the Chassis” on
page 9
2 Prepare the cabinet. “Prepare the Cabinet” on page 10
3 Locate the mounting holes. “Locate the Mounting Holes” on page 11
4 Install the slide assemblies into
the cabinet.
“Install the Slide Assemblies” on page 13
5 Install the server into the cabinet. “Install the Server Into the Cabinet” on
page 16
6 Install the cable management arm. “Install the Cable Management Arm” on
page 20
7 Secure the cords and cables to the
cable management arm.
“Secure the Cords and Cables to the Cable
Management Arm” on page 25
8 Install optional components. “Install Optional Components” on page 28
9 Connect the power cords. “Connect the Power Cords to the Server” on
page 30
10 Connect a twisted-pair Ethernet
(TPE) cable.
“Connect Twisted-Pair Ethernet Cables” on
page 32
11 Restore the cabinet. “Restore the Cabinet” on page 34