Filter
Top Products
Chapter 2 Installing a Sun Fire V440 Server Into a 4-Post Cabinet 33
2. Plug in a Category-5 unshielded twisted-pair cable (which is included in your
ship kit) to the appropriate RJ-45 connector.
You should hear the connector tab snap into place. The cable length must not exceed
328 feet (100 meters).
Note – Because the Sun Fire V440 server has two RJ-45 ports, to help avoid
confusing the two later, you should label each cable at each end, identifying which
cable is connected to which port.
3. Plug in the cable to the RJ-45 outlet to connect to your Ethernet network.
See your network administrator if you need more information about how to connect
to your network.
CAUTION: In order to remove all
power from this unit, disconnect
all power cords.
ATTENTION: Pour mettre le systeme
hors tension, il est imperatif de
debrancher tous les cordons d
alimentation
VORSICHT: Trennen Sie alle
Stromkable um die, gesamte
PCI 2
PCI 2
33/66MHz
33/66MHz
PCI 4
PCI 4
33/66MHz
33/66MHz
PCI 5
PCI 5
33/66MHz
33/66MHz
PCI 3
PCI 3
33 MHz
33 MHz
PCI 1
PCI 1
33MHz
33MHz
PCI 0
PCI 0
33MHz
33MHz
RMC
RMC
SERIAL
10/100/1000
0
2
1
3
0
1
AC
AC
1AC
AC
0