16 Sun Fire V440 Server Installation Guide • July 2003
Install the Server Into the Cabinet
Caution – Before you install or remove the server from the cabinet, be sure the
cabinet is stabilized so that it cannot move or tip forward. See the cabinet
documentation for information about stabilizing the cabinet.
Caution – The server is heavy. Two persons are required to move the server.
Note – Make sure that each slide assembly is fully retracted into the cabinet and
check that the ball-bearing runner on each slide assembly is all the way forward.
1. With one person on each side of the server, lift the server and approach the
cabinet with the back of the server facing the front of the cabinet.
Note – Do not use the vent holes in the server doors as “handles” to lift the server.
2. Align the rounded ends of the inner glides on the server with the slide assemblies
in the cabinet.
Note – Make sure that the inner glides attached to the server are inserted within the
ball-bearing runners.
!
!