Filter
Top Products
12 Sun Fire V440 Server Installation Guide • July 2003
To use the Rack Alignment template, complete these steps:
a. Place the Rack Alignment template over the right front vertical rack rail, then
move the bottom of the template to the location on the rack rail where the
bottom of the server will be located.
b. Adjust the Rack Alignment template until the mounting holes openings are
centered on two holes in the rail and the retainer screw hole is visible.
When you do this, the top of the template is midway between a set of half-inch
holes.
c. Repeat Step a and Step b for the left front vertical rack rail.
R
a
c
k
A
l
i
g
n
m
e
n
t
T
e
m
p
l
a
t
e
Retainer screw hole
Mounting holes