Filter
Top Products
26 Sun Fire V440 Server Installation Guide • July 2003
2. Locate the oval cutouts in the center section of the cable management arm and the
Velcro straps in the first and third sections.
The cutouts and straps enable you to route the cables and cords and to secure them
to the cable management arm.
3. Route the cords and cables between the upper and lower lips of the first section of
the cable management arm.
Ensure that cords and cables provide enough slack to allow routing, yet are taut
enough to avoid obstruction of the slide assemblies.
4. Tie the cords and cables to the first section of the cable management arm.
Use the Velcro straps to tie the cables to the cable management arm. How you tie the
straps to the cable management arm depends on the size and number of your cables.
For example, for a smaller bundle of cables, thread the Velcro straps through the
slots in the upper and lower lips. For a larger bundle of cables, wrap the straps
completely around the cables and the cable management arm.
Velcro straps
Oval cutouts
Velcro straps
First
section
Upper lip