56 Sun Fire T1000 Server Service Manual • January 2006
6. Press the release buttons on both mounting brackets (FIGURE 3-2) to release the
right and left mounting brackets, then pull the server chassis out of the rails.
The mounting brackets slide approximately 4 in (10 cm) further before disengaging.
FIGURE 3-2 Location of the Mounting Bracket Release Buttons
7. Set the chassis on a sturdy work surface.
▼ To Perform Electrostatic Discharge (ESD)
Prevention Measures
1. Prepare an antistatic surface by which to set parts during removal and installation.
Place ESD-sensitive components such as the printed circuit boards on an antistatic
mat. The following items can be used as an antistatic mat:
■ Antistatic bag used to wrap a Sun replacement part
■ Sun ESD mat, part number 250-1088
■ Disposable ESD mat (shipped with some replacement parts or optional system
components)
2. Use an antistatic wrist strap.