Filter
Top Products
D-1
Appendix D: System Specifications
Appendix D
System Specifications
Processors
Single or dual Intel
®
Itanium
®
2 processors of up to 1.50 GHz with a 6
MB L3 cache at a front side (system) bus speed of 400 MHz
Note: Please refer to the support section of our web site for a complete listing of
supported processors. (http://www.supermicro.com/support/)
Chipset
Intel E8870 chipset
BIOS
6 MB AMI
®
Flash ROM
Memory Capacity
Eight 184-pin, DDR DIMM sockets supporting up to 16 GB of low-profile,
registered ECC DDR200 (PC1600) SDRAM
Note: Interleaved memory; requires memory to be installed two at a time. Memory
speed is dependant on processor front side bus speed. See Chapter 5 for details.
Peripheral Drive Bays
One (1) slim CD-ROM drive
Four (4) 3.5 x 1" drive bays (for SCSI drives)
Expansion Slots (provided with riser card)
One (1) 64-bit 133/100 MHz standard PCI-X slot
Serverboard
Model: i2DML-8G2/i2DML-iG2 (Extended ATX form factor)
Dimensions: 12.25 x 13.05 in (311 x 331 mm)
Chassis
Model: SC813HS-500/SC813Hi-500 Form Factor: 1U rackmount
Dimensions: (WxHxD) 17.2 x 1.7 x 25.6 in. (437 x 44 x 650 mm)