Filter
Top Products
Chapter 5: Advanced Serverboard Setup
5-15
i2DML-8G2/i2DML-iG2 Quick Reference
Jumper Description Default Setting
CN5 Power Fail Alarm Enable/Disable Closed (Disabled)
J7 GLAN Enable/Disable Pins 1-2 (Enabled)
J31 Watch Dog Pins 1-2 (Reset)
JBT1 CMOS Clear See Section 5-9
JA1* SCSI Enable/Disable Pins 1-2 (Enabled)
JV1 VGA Enable/Disable Pins 1-2 (Enabled)
Connector Description
DS3/DS4 Debug LEDs
DS7* SCSI LEDs
Fan1 - 8 Fan1 through Fan8 Headers
J1 Backpanel USB Ports (USB0/1)
J2 VGA Connector
J3* SCSI Channel B Connector
J5 COM1 Serial Port
J6 Wake-on-Ring Header
J9 - J16** DDR Memory Sockets
J18* SCSI Channel A Connector
J19 PCI-X Bus (256-Pin Slot)
J20 24-pin Power1 Connector
J21 Front Panel USB Ports (USB2/3)
J22 System Management Bus Connector
J25 Chassis Intrusion Header
J26 IPMI 1.5, 2.0 Connector
J27 System Management Bus Power Header
J30/J29 CPU 1/2 Sockets
J31 Watch Dog Reset
J36 24-pin Power2 Connector
J37/J35 IDE1/2 Disk Drive Connectors
J38 COM2 Serial Header
S1-6 BIOS Chips
U62 Power Fault Connector
U66 Front Control Panel Connector
* i2DML-8G2 only
** See Section 5-5 for details on installing memory