Filter
Top Products
7-4
SUPERSERVER 6113L-8/6113L-i User's Manual
Serial Port1 Address/Serial Port2 Address
This option specifies the base I/O port addresses and Interrupt Request
addresses of Serial Port 1 and Serial Port2. Select "Disabled" to prevent the
serial ports from accessing any system resources. When this option is set
to Disabled, the serial ports become physically unavailable. The options are
"Enabled" and "Disabled." The default setting for Serial Port1 is "Enabled".
When "Enabled" is selected for Serial Port1, the address for Serial Port1 will
be automatically set to 2F8/IRQ3. The default setting for Serial Port2 is
"Disabled". When "Disabled" is selected for Serial Port2, Serial Port2 will
become physically unavailable.
!!
!!
!IDE Configuration
The screen for the Primary IDE Master is shown below.
When you select this Sub Menu, AMI BIOS automatically displays the status
of the following items: Device, Vendor, Size, LBA Mode, PIO Node, Asynch
DMA, UltraDMA and S.M.A.R.T.