Filter
Top Products
AOC-USAS-L8i Add-on Card User’s Manual
6-14
3. Click NEXT.
The DEFINING A VIRTUAL DISK screen of the Configuration Wizard appears, as shown
in Figure 6-9.
The A
RRAYS menu lists the new array that you just defined, plus any existing arrays
with holes (free space) that could be used for a new configuration.
4. From the A
RRAYS menu, select the array to use for the new virtual disk.
5. In the right VIRTUAL DISK PROPERTIES panel, select RAID 0 as the RAID level.
6. (Optional) Set Size (in MB) to a lower number if you do not want to use the entire
available capacity for the new virtual disk.
7. (Optional) Change the other properties in the V
IRTUAL DISK PROPERTIES panel, if
necessary.
8. Click A
CCEPT to accept the configuration of the new virtual disk.
Figure 6-9. Defining a Virtual Disk Screen