Filter
Top Products
AOC-USAS-L8i Add-on Card User’s Manual
8-6
4. When you are prompted to select a volume type, select CREATE IS VOLUME.
The CREATE NEW ARRAY screen (Figure 8-4) that appears shows a list of disks that
can be added to a volume.
5. Move the cursor to the RAID D
ISK column. To add a disk to the volume, change the
N
O to YES by pressing the + key, - key, or SPACE bar.
As disks are added, the ARRAY SIZE field changes to reflect the size of the new
volume.
6. When you have added the desired number of disks to the array, press C and then
select S
AVE CHANGES. Then exit this menu to commit the changes.
The configuration utility pauses while the array is being created.
Be aware that there are several limitations when creating an IS (RAID 0) volume:
• All disks must be either SATA (with extended command set support) or SAS (with
SMART support).
• Disks must have 512-byte blocks and must not have removable media.
• There must be at least two and no more than ten drives in a valid IS volume. Hot
spare drives are not allowed.
Figure 8-4. Create New Array Screen