Filter
Top Products
AOC-USAS-L8i Add-on Card User’s Manual
9-6
Program Return Value –
0x00 SUCCESS: command completed successfully.
0x01 FAILURE: bad command line arguments or operational failure.
Sample Output –
The following example shows a sample output of the CREATE command when used to
create an IM configuration.
Read configuration has been initiated for controller 0
------------------------------------------------------------
Controller information
------------------------------------------------------------
Controller type : LSI1064/1068
BIOS version : 6.05.05.00
Firmware version : 0.07.01.00
SCSI channel description : 1 Serial Attached SCSI
Initiator IDs (SCSI ID) : 63
Maximum physical devices : 62
Concurrent commands supported : 511
Slot : 1
Bus : 2
Device : 2
Function : 0
------------------------------------------------------------
IR Volume information
------------------------------------------------------------
IR volume 1
Status of volume : Okay (OKY)
RAID level : 1
Size (in MB) : 34332
Physical hard disks (SCSI ID) : 10 7
------------------------------------------------------------
Enclosure information
------------------------------------------------------------
Enclosure # : 1
Enclosure WWN : 12345678:ABCDABCD
Start Slot : 1
Num Slots : 4
Start SCSI ID : 0
------------------------------------------------------------
Physical device information
------------------------------------------------------------
Initiator at SCSI ID 63
Target on SCSI ID 7
Enclosure # : 1
Slot # : 1
Device is a Hard disk
SCSI ID : 7
State : Online (ONL)
Size (in MB)/(in sectors) : 34732/71132958