Filter
Top Products
9-5
Chapter 9: Using the CFGGEN IR Configuration Utility
DEFAULTS Command
The DEFAULTS (DELETE) command deletes any IM, IME, and IS volumes and hot
spare drives created by the CREATE and HOTSPARE commands. No other controller
configuration parameters are changed.
Command Line –
DOS, Linux, WinPE versions:
cfggen <controller #> defaults [noprompt]
EFI version:
cfggen <controller #> delete [noprompt]
Parameters –
• <controller #> – Number of the SAS controller targeted by this command.
• noprompt – Suppresses display of warnings and prompts.
Program Return Value –
0x00 SUCCESS: command completed successfully.
0x01 FAILURE: bad command line arguments or operational failure.
DISPLAY Command
The DISPLAY command displays configuration information for the supported SAS
controllers. The information includes controller type, firmware version, BIOS version,
volume information, and physical drive information. An example of the information that
will be output by this command is provided in Sample Output below.
Command Line –
cfggen <controller #> display [filename]
Parameters –
• <controller #> – Number of the SAS controller targeted by this command.
• [filename] – Optional valid filename to store the output of the command to a file.
NOTE: This command is called DELETE in the EFI version of CFGGEN.
NOTE: 1 megabyte = 1,048,576 bytes. All sizes displayed in megabytes are
rounded down to the nearest megabyte.