Filter
Top Products
4-13
Operating the SPS 3000
The encryption information is useful when associating to an access point, as the adapter
and access point are required to use the same encryption algorithm to interoperate.
Changes to the operating mode can be made using the Mode property page. Transmit
power can be adjusted in the Radio Transmission Power field of the Power property page.
Figure 4-7. Info Property Page
IP Config Property Page
Use the IP Config property page to view and edit the following: IP address, subnet,
gateway, DNS, WINS, MAC address and host name.
Select DHCP (Dynamic Host Configuration Protocol) to obtain a leased IP address and
network configuration information from a remote server. DHCP is a read-only window and
is the default setting.