Filter
Top Products
4-23
Operating the SPS 3000
APs Property Page
Use the APs property page in Infrastructure mode to view access points with the same
ESSID as the adapter within the wireless network. View the AP MAC address, signal and
direct sequence channel of each located access point. If the current adapter signal strength
is poor, one of the access points displayed could provide a stronger signal.
Select and tap on an access point to display a pull-down menu used for setting the adapter
access point roaming capabilities. Selecting Set Mandatory prohibits the adapter from
associating with a different access point. The letter M displays on top of the AP diagram
when the Set Mandatory option is selected. Selecting Set Roaming enables the adapter to
roam to an access point.
Tap Refresh to update the list of the known APs.
Figure 4-14. APs Property Page
When Ad Hoc is selected as the operating mode, the Signal and APs property pages
disappear.