Filter
Top Products
6000-100AppD.fm Rev. D TimeVault™ User’s Manual D-113
Symmetricom SNMP Enterprise MIB Appendix D: SNMP – Simple Network Management Protocol
trapMsgSnmpAuthFail OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
“This is an ASCII string sent to UDP port 162 (or user defined) when
the TrueTime time server determines the SNMP authentication for a SNMP
PDU is in correct. The message is ‘SNMP Authentication Failure Trap
PDU from: ###.###.###.###’. Where ###.###.###.### is the doted
decimal notation of the IP address of the unit attempting the invalid
access.”
::= { trapMsg 3 }
trapMsgGpsAntennaFault OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
“This is an ASCII string sent to UDP trap port (162 or user defined) when
the TrueTime time server’s GPS detects change of the GPS status. The
message is ‘GPS Antenna: *****************, from ###.###.###.###’. Where
***************** is either GPS Antenna OK, GPS Antenna Open or GPS Antenna
Short and ###.###.###.### is the doted decimal notation of the IP address
of the unit reporting the change.”
::= { trapMsg 4 }
trapMsgGpsUnlocked OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
“This is an ASCII string sent to UDP trap port (162 or user defined) when
the TrueTime time server’s GPS detects change of the GPS status. The
message is ‘GPS Status: ********, from ###.###.###.###’. Where ******** is
either LOCKED or UNLOCKED and ###.###.###.### is the doted decimal notation
of the IP address of the unit reporting the change.”
::= { trapMsg 5 }
trapMsgNewSyncType OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
“This is an ASCII string sent to UDP trap port (162 or user defined) when
the TrueTime time server’s GPS detects change of the GPS status. The
message is ‘Time synchronization type is now ****, from ###.###.###.###’.
Where **** can be GPS, ACTS or NTP and ###.###.###.### is the doted decimal
notation of the IP address of the unit reporting the change.”
::= { trapMsg 6 }