Filter
Top Products
D-114 TimeVault™ User’s Manual 6000-100AppD.fm Rev. D
Appendix D: SNMP – Simple Network Management Protocol Symmetricom SNMP Enterprise MIB
trapMsgCrossCheckAlarm OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
“This is an ASCII string sent to UDP trap port (162 or user defined) when
the TrueTime time server’s detects an offset in time equal to, or greater
than, one second from the cross check server and itself and the server is
not otherwise in a system alarm condition. The message is ‘Cross Check
Status: *****, from ###.###.###.###’. Where **** can be OK or Alarm and
###.###.###.### is the doted decimal notation of the IP address of the unit
reporting the change.”
::= { trapMsg 7 }
ntpInPkts OBJECT-TYPE
SYNTAX Counter
MAX-ACCESS read-only
STATUS current
DESCRIPTION
“Total number of NTP packets delivered to the NTP application
layer from the transport layer.”
::= { ntp 1 }
ntpOutPkts OBJECT-TYPE
SYNTAX Counter
MAX-ACCESS read-only
STATUS current
DESCRIPTION
“Total number of NTP packets passed from the NTP application
layer to the transport layer.”
::= { ntp 2 }
ntpInErrors OBJECT-TYPE
SYNTAX Counter
MAX-ACCESS read-only
STATUS current
DESCRIPTION
“Total number of NTP packets reject for any reason by NTP
application layer.”
::= { ntp 3 }
ntpAuthFail OBJECT-TYPE
SYNTAX Counter
MAX-ACCESS read-only
STATUS current
DESCRIPTION
“Total number of authentication failures. This is a subset of
ntpInErrors.”
::= { ntp 4 }