Filter
Top Products
TANDBERG Border Controller User Manual
2 Installation
2.1 Precautions
• Never install communication equipment during a lightning storm.
• Never install jacks for communication cables in wet locations unless the jack is specifically
designed for wet locations.
• Never touch uninstalled communication wires or terminals unless the communication line
has been disconnected at the network interface.
• Use caution when installing or modifying communication lines.
• Avoid using communication equipment (other than a cordless type) during an electrical
storm.
• There may be a remote risk of electrical shock from lightning.
• Do not use communication equipment to report a gas leak in the vicinity of the leak.
• The socket outlet shall be installed near to the equipment and shall be easily accessible.
• Never install cables without first switching the power OFF.
• This product complies with directives: LVD 73/23/EC and EMC 89/366/EEC.
• Power must be switched off before power supplies can be removed from or installed into
the unit.
2.2 Unpacking
The TANDBERG Border Controller is delivered in a special shipping box which should contain
the following components:
• Border Controller unit
• Installation sheet
• User manual and other documentation on CD
• Rack-ears and screws
• Kit with 4 rubber feet
• Cables:
– Power cables
– One Ethernet cable
– One null-modem RS-232 cable
3