Filter
Top Products
TANDBERG Border Controller User Manual
xConfiguration SubZones SubZone [1..100] Bandwidth Total Mode: <None/Limited/Unlimited>
Whether or not the indexed subzone is enforcing total bandwidth restrictions. None corresponds
to no bandwidth available.
xConfiguration SubZones SubZone [1..100] Name: <subzonename>
Name of the indexed subzone.
xConfiguration SubZones SubZone [1..100] Subnet IP Address: <IPAddr>
IP to match an endpoint which belongs in this subzone.
xConfiguration SubZones SubZone [1..100] Subnet IP PrefixLength: <IPAddr>
Number of bits which must match for an IP address to belong in this subzone.
11.2.17 SystemUnit
xConfiguration SystemUnit Name: <name>
The name of the unit. Choose a name that uniquely identifies the system.
xConfiguration SystemUnit Password: <password>
Specify the password of the unit. The password is used to login with Telnet, HTTP(S), SSH, SCP,
and on the serial port. To set an empty password type
xConfiguration SystemUnit Password: ""
11.2.18 Telnet
xConfiguration Telnet Mode: <On/Off>
Enables/disables Telnet support. For secure operation you should use ssh in preference to telnet.
You must restart the system for changes to take effect.
11.2.19 TimeZone
xConfiguration TimeZone Name: <timezone name>
Sets the local timezone. Timezone names follow the POSIX naming convention e.g. Eu-
rope/London or America/New York.
11.2.20 Traversal
xConfiguration Traversal UDPProbe RetryInterval: <seconds>
Interval with which a failed attempt to establish a UDP channel should be repeated.
xConfiguration Traversal UDPProbe RetryCount: <count>
Number of attempts at re-establishing a failed UDP channel.
54