Filter
Top Products
TANDBERG Border Controller User Manual
xConfiguration Traversal UDPProbe KeepAliveInterval: <seconds>
Interval with which a UDP channel should be refreshed. xConfiguration Traversal TCPProbe
RetryInterval: <seconds >
Interval with which a failed attempt to establish a TCP channel should be repeated.
xConfiguration Traversal TCPProbe RetryCount: <count>
Number of attempts at re-establishing a failed TCP channel.
xConfiguration Traversal TCPProbe KeepAliveInterval: <seconds>
Interval with which a TCP channel should be refreshed.
xConfiguration Traversal Media RTP Port: <port>
UDP port to which media should be sent. Conventionally this will be an even numbered port.
The default is 2776.
xConfiguration Traversal Media RTCP Port: <port>
UDP port to which media control information should be sent. Conventionally this will be set to
RTP port + 1. The default is 2777.
11.2.21 Zones
Traversal zones control how the Border Controller communicates with a Gatekeeper which it is
cooperating with to provide firewall traversal.
xConfiguration Zones TraversalZone [1..50] Name: <name>
Sets the name of the TANDBERG Gatekeeper which is allowed to connect to this Border
Controller.
xConfiguration Zones TraversalZone [1..100] HopCount: <count>
Specifies the hop count to be used when originating an LRQ.
xConfiguration Zones TraversalZone [1..100] Match [1..5] Mode: <AlwaysMatch/PatternMatch/Disabled>
The prefix match mode determines when an LRQ will be sent to gatekeepers in the zone. If the
mode is set to AlwaysMatch the zone will always be queried. If the mode is set to PatternMatch,
the zone will only be queried if the alias queried for matches the corresponding pattern. If the
mode is set to Disabled the zone will never be queried.
xConfiguration Zones TraversalZone [1..100] Match [1..5] Pattern String: <pattern>
The pattern to be used when deciding whether or not to query a zone. This is only used if the
zone’s match mode is set to AlwaysMatch.
xConfiguration Zones TraversalZone [1..100] Match [1..5] Pattern Type: <Prefix/Suffix>
Deter mine s whether the pattern string being checked should ap pear at the beginning or end of
an alias.
55