Filter
Top Products
TANDBERG Border Controller User Manual
Specifies the first node of a link. A node name may be either a Zone name or a SubZone name.
xConfiguration Links Link [1..100] Node2 Name: <nodename>
Specifies the second node of a link. A node name may be either a Zone name or a SubZone
name.
xConfiguration Links Link [1..100] Pipe1 Name: <pipename>
First pipe associated with a link.
xConfiguration Links Link [1..100] Pipe2 Name: <pipename>
Second pipe associated with a link.
xConfiguration Links TraversalLink Pipe1 Name: <pipename>
First pipe associated with the traversal link.
xConfiguration Links TraversalLink Pipe2 Name: <pipename>
Second pipe associated with the traversal link.
11.2.9 Log
xConfiguration Log Level: <1..3>
Controls the granularity of event logging with 1 being the least verbose, 3 the most.
11.2.10 NTP
xConfiguration NTP Address: <IPAddr>
Sets the IP address of the NTP server to be used when synchronizing system time. Accurate
timestamps play an important part in authentication, helping to guard against replay attacks.
11.2.11 Option Key
xConfiguration Option [1..64] Key: <optionkey>
Specify the option key of your software options.
xstatus system software configuration can be used to discover the existing options. You
must restart the system for changes to take effect.
11.2.12 Pipes
xConfiguration Pipes Pipe [1..100] Bandwidth Total Limit: <1..100000000>
Bandwidth associated with a pipe, keyed by index.
xConfiguration Pipes Pipe [1..100] Bandwidth Total Mode: <None/Limited/Unlimited>
51