Filter
Top Products
TANDBERG Border Controller User Manual
The IPv4 gateway of the system.
xConfiguration IP V6 Address: <IPAddr>
The IPv6 address of the system.
xConfiguration IP V6 Gateway: <IPAddr>
The IPv6 gateway of the system.
All the IP commands listed above require a system restart before they take effect.
xConfiguration IP DNS Server [1..5] Address: <IPAddr>
Sets the IP address of the DNS servers to be used when resolving domain names. Nor mally only
the first DNS server will be queried for address resolution. I f it fails to respond, all DNS servers
will be queried. You must restart the system for changes to take effect.
xConfiguration IP DNS Domain Name: <name>
When attempting to resolve a domain name which is not fully qualified, name will be appended
to the domain name before the query to the DNS server is executed.
This parameter is only used when at tempt ing to resolve server addresses such as LDAP servers,
NTP servers etc. It plays no part in URI dialing: see xconfiguration gatekeeper localdomain
11.2.7 LDAP
Parameters under the LDAP node control the Border Controller’s communication with an LDAP
server.
xConfiguration LDAP Encryption: <Off/TLS>
Sets the encryption mode to be used on the connection to the LDAP server. The default is Off.
xConfiguration LDAP Password: <password>
Sets the password to be used when binding to the LDAP server.
xConfiguration LDAP Server Address: <IPAddr>
Sets the IP address of the LDAP server to be used when making LDAP queries.
xConfiguration LDAP Server Port: <1..65534>
Sets the IP port of the LDAP server to be used when making LDAP queries.
xConfiguration LDAP UserDN: <userdn>
Sets the user DN to be used when binding to the LDAP server.
11.2.8 Links
xConfiguration Links Link [1..100] Name: <linkname>
Specifies the name of a link in the list of links.
xConfiguration Links Link [1..100] Node1 Name: <nodename>
50