Filter
Top Products
TANDBERG Border Controller User Manual
Table 4: Event data (continued)
Field Description Applicable events
Src-ip Specifies the source IP ad-
dress (the IP address of the
device attempting to estab-
lish communications). The
source IP is recorded in the
dotted decimal format: (num-
ber).(number).(number).(number)
or the IPv6 colon separated
format.
• Call Attempted
• Call Bandwidth Changed
• Call Connected
• Call Disconnected
• Call Rejected
• Exter na l Server Communi-
cation Failure
• Incoming Message
• Outgoing Message
• Policy Change
• Registration Accepted
• Registration Rejected
• Registration Removed
• Registration Requested
Dst-ip Specifies the destination IP ad-
dress (the IP address of the des-
tination for a communication at-
tempt). The destination IP is
recorded in the same format as
Src-ip.
As Src-ip
Dst-port Specifies the destination port:
the IP port of the destination for
a communication attempt
As Src-ip
Src-port Specifies the source port: the IP
port of the device attempting to
establish communications.
As Src-ip
Src-Alias
• If present, the first H.323
Alias associated with the
originator of the message
• If present, the first E.164
Alias associated with the
originator of the message
• Registration Requested
• Call Attempted
• Call Connected
• Call Disconnected
• Call Rejected
• Call Bandwidth Changed
• Incoming Message
1
• Outgoing Message
1
1
Included if event parameter relevant or available for message concerned.
38