Filter
Top Products
TANDBERG Border Controller User Manual
Whether or not a given pipe is enforcing total bandwidth restrictions. None corresponds to no
bandwidth available.
xConfiguration Pipes Pipe [1..100] Bandwidth PerCall Limit: <1..100000000>
Per call bandwidth of a pipe.
xConfiguration Pipes Pipe [1..100] Bandwidth PerCall Mode: <None/Limited/Unlimited>
Whether or not a given pipe is enforcing per-call bandwidth restrictions. None corresponds to no
bandwidth available.
xConfiguration Pipes Pipe [1..100] Name: <pipename>
Name for a pipe.
11.2.13 Session
xConfiguration Session TimeOut: <0..65534>
Controls how long an adminstration session (HTTPS, Telnet or SSH) may be inactive before the
session is timed out. A value of 0 turns session time ou ts off. T he default is 0. You must restart
the system for changes to take effect.
11.2.14 SNMP
xConfiguration SNMP CommunityName: <name>
SNMP Community names are used to authenticate SNMP requests. SNMP requests must have
this ‘password’ in order to receive a response from the SNMP agent in the Gatekeeper. You must
restart the system for changes to take effect.
xConfiguration SNMP Mode: <On/Off>
Turn on/off SNMP support. You must restart the system for changes to take effect.
xConfiguration SNMP SystemContact: <name>
Used to identify the system contact via SNMP tools such as TANDBERG Management Suite or
HPOpenView. You must restart the system for changes to take effect.
xConfiguration SNMP SystemLocation: <name>
Used to identify the system location via SNMP tools such as TANDBERG Management Suite or
HPOpenView. You must restart the system for changes to take effect.
11.2.15 SSH
xConfiguration SSH Mode: <On/Off>
Enables/disables SSH and SCP support. You must restart the system for changes to take effect.
52