Filter
Top Products
TANDBERG Border Controller User Manual
10 Software Upgrade
Software upgrade can be done in one of two ways:
1. Using a web browser (HTTP/HTTPS).
2. Using secure copy (SCP).
NOTE To upgrade the Border Controller, a valid Release key and software file is required. Contact
your TANDBERG representative for more information.
NOTE Configuration is restored after performing an upgrade but we recommend that you make a
backup of the existing configuration using the TANDBERG Management Suite before performing
the upgrade.
10.1 Upgrading Using HTTP(S)
To upgrade using HTTP(S), do the following:
• Point your browser at the IP address of the Border Controller. You will be prompted for your
user name and password.
• Enter admin as the user name and enter the password, then press OK.
• Select the System Configuration tab, and the upgrade section.
• Enter the release key and press Install Software. You will get a new screen where you can
upload the software image:
• Browse to the file containing the software and press Install. You should see a page
indicating that upload is in progress:
40