Filter
Top Products
Reference
AD007 User Manua l
49
Table 4: Using the RESET button
Desired Result
When to push the
RESET button
How long to hold the
RESET button in
Bypass DHCP/BOOTP
request and reset to last
configuration
During LAN discovery
loop (DHCP/BOOTP
request) when LAN-Link
is amber
momentarily
Reset only the password
to factory default (ad007)
Read the binary code of
the adapter IP address
on the status indicators
During normal operation momentarily
Reset entire configura-
tion to factory defaults
During normal operation
or from power on
Until all indicators are
steady amber (~10
seconds)
Bypass DHCP/BOOTP and Reset to Last Configuration
To bypa ss DHCP/BOOTP and reset to the last configuration, do these
steps:
1. Power off the AD007 adapter and wait a few seconds.
2. Power on the AD007 adapter and wait until the adapter tries to
discover the LAN (the LAN light begins to bl ink green/amber
after the self test).
3. Using a small tool or end of a paper clip, momentari ly push in the
reset button. T his bypasses the LAN discovery (DHCP reque st).
4. When the LAN-Link indicator turns from amber to green, the
AD007 adapter has successfully loaded the last configuration.