Filter
Top Products
Section 6: Specifications
013-100149-02 Rev. 1 (01/07) Christie DS+60/DW30/Matrix 3000 User’s Manual 6-3
Composite Video and S-Video
Signal Formats Composite-video
(CVBS), S-video Y/C)
Video Standards NTSC, NTSC 4.43, PAL, PAL M,
PAL N, PAL60, SECAM
Input Levels Composite-video: 1.0Vp-p ±3db (including sync tip)
S-video luma (Y): 1.0Vp-p ±3dB (including sync tip)
S-video chroma (C): 630mV nominal (burst)
DC Offset ±2V
Nominal Impedance 75 ohms
Return Loss (VSWR) 20dB min (1.2:1 max.) @ 6 MHz
DVI-I – Analog
Input Characteristics Same as Analog RGB except as
noted below.
Formats RGB or YPbPr – video signal cannot
be routed to the decoder.
Sync Types Separate H and V
(direct or swapped)
Bi-level – TTL levels only
Composite (XOR, OR)
Sync-on-green
Serrations and/or Equalization pulses
MacroVision™
(standard & progressive)
DVI-I – Digital
Input Characteristics meets DVI spec
DVI Cable Length 5m
EDID Supported
HDCP (High Speed Digital Content Protection) Supported
RS-232 Serial Input
Connector Type 1 male DB9 (RS-232 out)
1 female DB9 (RS-232 in)
RS-422 Serial Input
Connector Type 1 female DB9 connector
Network Control
Ethernet 1 RJ45 connector
Max. Baud Rate 115200
Remote Control
Type IR with wired ability
Range 30 meters
Laser Pointer Included
Battery Type (2 required) AA, 1.5V Alkaline
Wired Control
Connector Type 3.5mm plug
Input Levels High: 2.2V min.
Low: 0.9V max.
Power: 500mA @ 5V