Filter
Top Products
Section 3: Operation
3-10 Christie DS+60/DW30/Matrix 3000 User’s Manual 013-100149-02 Rev. 1 (01/07)
Laser
Press
to activate the laser pointer on the remote. This feature is useful when
making presentations - just point the remote at the screen to highlight an area of your
presentation. Keep the
key depressed while
you are pointing. Release it to turn it off. The
laser pointer works best in an environment
where ambient lighting can be controlled.
NOTE: The batteries must be in the wired IR
remote for the
key to work.
Most of the controls for the projector are accessed from within the projector’s menu
system. There are several groups of related functions, with each group selectable from
the Main menu as shown at right. Press
Menu
at any time to display this Main menu.
On the IR remote, either enter the number
corresponding to the function menu you
wish to access, such as
2
for the Image
Settings menu, or use the
keys
on
any keypad to highlight the desired option,
then press
. The corresponding function
menu or pull-down list of further options
will then appear.
With a function menu displayed, navigate in
a similar manner—enter a menu option number for any numbered option or use the
keys to highlight the desired option, then press (Enter). Extra long
menus have a scroll bar on the right—use the arrow keys to access the remainder of
the menu. Locked items or items that do not pertain to the current action or condition
appear dimmed and cannot be selected.
NOTES: 1) If there is no signal present, all source-dependent adjustments are
disabled. 2) After 15 minutes of inactivity, the projector leaves the menu system and
returns to the presentation. 3) The Status menu is read-only.
When finished with a function menu, do one of the following:
• Press
Exit
to return to the previous screen
• Press
Menu
to leave the menu system and return to the presentation
If at any time you are uncertain what to do next, press
Help
to display summary
information about the current menu or highlighted option. Press
Help
again to exit. In
addition, a line of “hint” text is included at the bottom of some menus.
3.3 Navigating the
Menus
Figure 3.4. Entering the Menu System
On-line Hel
p
f
LASER RADIATION
DO NOT STARE INTO BEAM
LASER DIODE
Wavelength 670nm
Max Output 1mW
CLASS II LASER PRODUCT
CAUTION