Filter
Top Products
Section 3: Operation
013-100149-02 Rev. 1 (01/07) Christie DS+60/DW30/Matrix 3000 User’s Manual 3-39
* Functions are only active when the Slider Lock is set to Unlocked
NOTE: It is important to ensure the channels DO NOT overlap another device.
Example:
Good Bad
Proj1_Base = 0 Proj1_Base = 5
Proj2_Base = 10 Proj2_Base = 9
Proj3_Base = 20 Proj3_Base = 11
DEVICE NAME:
This option is used to name each device; some ArtNet servers support
querying for devices.
DEVICE DESCRIPTION: More information that is returned when a “device query” has
been done.
Broadcast Key
Enter a checkmark if you want keypad commands sent to one projector to be relayed
to all projectors in a serial network. Note that the
Proj
key will temporarily “override”
the effect of a broadcast setting and allow you to control a specific projector when
necessary. Disable the setting for all but one (any) projector in a network.
Backlight
Toggle to turn the built-in keypad backlighting on and off.
Front IR / Back IR
As needed for your application, set to “any” so that the front and/or rear IR sensor
locations on the projector respond to the IR keypad. Set to “off” to disable.
DMX Channel Function Value
Base Shutter
0 – 64
65 – 192
193 – 255
Open
No Action
Closed
Base + 1 Slider Lock
0 – 254
255
Locked
Unlocked *
Base + 2 Input * 1 – 8 Input #
Base + 3 Channel * 1-99 Channel #
Base + 4 Lens – Vertical * †
0
1 – 254
255
Lens Down
Stop
Lens Up
Base + 5 Lens – Horizontal * †
0
1 – 254
255
Lens Right
Stop
Lens Left
Base + 6 Lens – Focus * †
0
1 – 254
255
Negative Focus
Stop
Positive Focus
Base + 7 Lens – Zoom * †
0
1 – 254
255
Zoom Out
Stop
Zoom In
Base + 8 Power *
0
1 – 254
255
Power Off
No Action
Power On
Base + 9 None