Filter
Top Products
Section 2: Installation and Setup
013-100149-02 Rev. 1 (01/07) Christie DS+60/DW30/Matrix 3000 User’s Manual 2-13
Figure 2.11. Connecting RGB and Sync
NOTES: 1) If for some reason the projector fails to recognize a signal as an RGB
signal, specify the Color Space option within the Image Settings menu. See 3.7,
Adjusting the Image. 2) To connect YPbPr signals–such as from DVDs or analog HDTV
sources–to
INPUT 1, use the red, green and blue BNCs as described in YPbPr Signals
(below). 3) Use the computer cable provided, to connect some devices to the DVI-I
connector at Input 2.
Connect a YPbPr signal (component video) to
INPUT 1 or INPUT 2 as shown in Figure
2.12.
NOTES: 1) If, for some reason, the projector fails to recognize a YPbPr signal,
specify the Color Space option within the Image Settings menu. See 3.7, Adjusting
the Image. 2) Do not connect digital
component signals (known as YCbCr) to INPUT
1
. Install an appropriate optional module in INPUT 5 for this.
Figure 2.12. Connecting YPbPr sources
YPbPr si
g
nals f