Filter
Top Products
Section 3: Operation
3-40 Christie DS+60/DW30/Matrix 3000 User’s Manual 013-100149-02 Rev. 1 (01/07)
To disable both IR sensors, you cannot use the IR remote keypad to select the second
OFF setting. This safeguard prevents accidentally disabling an IR keypad while you
are using it. Instead, use either the built-in keypad or a wired remote (optional) to set
the remaining active sensor to
OFF. The projector will no longer respond to an IR
remote keypad.
NOTE: Protocols B – G are used for rental staging applications.
Wired Keypad
The wired keypad is ON by default to when connected to the rear of the projector. The
projector will then respond to incoming commands from this port. To disable the
wired keypad, you must use a different keypad—the built-in or an IR remote—to
select “off”. This safeguard prevents you from accidentally disabling the wired
keypad during use.
In the Configuration menu, select
the Geometry and Color submenu
when you need to modify overall
color performance and/or image
geometry for all sources.
Test Pattern
Choose the desired internal test
pattern, or select OFF to turn off a
test pattern. Alternatively, use the
Test
key for cycling through test patterns.
Keystone and Warping
NOTE: To see the submenu at right
requires the ChristieTWIST
™
warping module, which is standard
with Matrix projectors. Without this
module, this submenu is replaced with
a slidebar for adjusting Keystone –
all other projectors will have this.
Refer to the description provided later
in this section.
Use the Keystone and Warping submenu to shape your images using new corner
points and/or to apply customized curved image boundaries (warps).
WARP SELECT: Choose a type of image shaping to apply,
or choose to disable these adjustments. Settings apply to
all sources.
Disabled: Display standard (rectangular) images with
no warping or keystone adjustments applied.
2D Keystone: Move four corners of the image to
correct for a keystoned image and/or to create an
unusual four-sided image exhibiting perspective or
distortion. See 2D Keystone, below.
User 1-10: Apply a custom image shape or twist that has been defined in the
ChristieTWIST™ Basic v1.0 PC application and downloaded to projector
System Configuration
f
— GEOMETRY & COLOR —