Filter
Top Products
DDR2 Memory Controller Registers
www.ti.com
Table 20. SDRAM Configuration Register (SDCFG) Field Descriptions (continued)
Bit Field Value Description
11-9 CL CAS latency. The value of this field defines the CAS latency, to be used when accessing
connected SDRAM devices. A write to this field will cause the DDR2 Memory Controller to
start the SDRAM initialization sequence. This field is writeable only when the TIMUNLOCK bit
is unlocked. Values 0, 1, 6, and 7 are reserved for this field.
2 CAS latency of 2.
3 CAS latency of 3.
4 CAS latency of 4.
5 CAS latency of 5.
8-7 Reserved Reserved. The reserved bit location is always read as 0. A value written to this field has no
effect.
6-4 IBANK Internal SDRAM bank setup bits. Defines number of banks inside connected SDRAM devices.
A write to this bit will cause the DDR2 Memory Controller to start the SDRAM initialization
sequence. Values 4-7 are reserved for this field.
0 One bank SDRAM devices.
1 Two banks SDRAM devices.
2 Four banks SDRAM devices.
3 Eight banks SDRAM devices.
3 Reserved Reserved. The reserved bit location is always read as 0. A value written to this field has no
effect.
2-0 PAGESIZE Page size bits. Defines the internal page size of the external DDR2 memory. A write to this bit
will cause the DDR2 Memory Controller to start the SDRAM initialization sequence. Values 4-7
are reserved for this field.
0 256-word page requiring 8 column address bits.
1 512-word page requiring 9 column address bits.
2 1024-word page requiring 10 column address bits.
3 2048-word page requiring 11 column address bits.
42
C6455/C6454 DDR2 Memory Controller SPRU970G–December 2005–Revised June 2011
Submit Documentation Feedback
Copyright © 2005–2011, Texas Instruments Incorporated