Filter
Top Products
125
4
2. RGB Adjustment
This function allows you to adjust an overall colour balance of the copied image by changing the strength
of red (R), green (G) and blue (B) at the time of scanning.
• This function is available only in the full colour mode.
1
Place paper in the drawer(s).
2
Place the original(s).
3
Press the [IMAGE] button to enter the image menu, and then press the
[RGB ADJUSTMENT] button.
4
Press the or button of the colour to obtain the desired colour
balance. Then press the [ENTER] button.
• “0” is the standard setting.
• Pressing the button strengthens the adjusted colour, and pressing the button weakens it.
• Select other copy modes as required.
5
Press the [START] button.
Canceling RGB adjustment
Move the indicator of the colour whose adjustment you want to cancel its adjustment to 0 by your
pressing the or button, and then press the [ENTER] button.
If you want to cancel the adjustment of all colours, press the [DEFAULT] button, and then press the
[ENTER] button.