Filter
Top Products
151
5
6
Enter the values read in step 5 for the specified area, and then press
the [SET] button. Set 4 values in order.
• After the setting of 4 values is finished, the next edit area menu is displayed. Repeat steps 5 and 6 when you
specify other areas. Up to 4 areas can be specified on an original.
• To correct the value which has been set, press the [RESET] button. Pressing it once makes the highlighted
field move one position upward. Highlight the field in which you want to rectify the value, and then key in the
correct one.
7
Press the [ENTER] button after specifying the area.
4
Place the original with its face up on the
original glass.
• Set the original face up with its bottom toward you and fit its top
left corner against the top left corner of the original glass, and
align it with the original scales.
Do not place heavy objects (4 kg or more) on the original glass and
do not press on it with force. Breaking the glass could injure you.
5
Specify the area. Using the original scale
on the left and the inner (top) scale, read
the following 4 values:
X1: Distance from the top left to the left edge of the
specified area
X2: Distance from the top left to the right edge of the
specified area
Y1: Distance from the top left to the upper edge of the
specified area
Y2: Distance from the top left to the lower edge of the
specified area
• The marks of the original scale have a 2 mm pitch.