Filter
Top Products
35
1
When department or user management is used
When the use of the equipment is managed under department management or user management func-
tion, each user needs to enter the department code or user information.
Department management
You can restrict users or manage copy volumes made by an individual group or department in your com-
pany using the department codes. When the copy volume is controlled under the department code, enter
the code after turning the power on. See the User Functions Guide for setting and registration of the
department codes.
When the power is turned on, the following menu appears.
• This menu also appears when the [ACCESS] button is pressed or the automatic function clear has
worked.
Key in a department code (5 digits) previously registered and press the [ENTER] button. The menu will
switch and the equipment will be ready to be used.
• If the department code keyed in is incorrect, the menu does not change. In this case, press the [FUNC-
TION CLEAR] button and then key in the correct code.
When copying is finished
When you finish all operations, press the [ACCESS] button to prevent unauthorized use of the equipment.
The display returns to the department code input menu.