Toshiba 281c/351c/451c Copier User Manual


 
168
5.USING THE EDITING FUNCTIONS
13.JOB BUILD (Cont.)
5
4
After “Press START button to copy after changing settings.” appears,
perform the settings for the 1st job and the common settings for all
jobs.
Press the [SETTINGS] button to confirm the settings.
To change the settings, press the [FUNCTION CLEAR] button, and then start the procedure again from step 1.
5
Press the [START] button.
The scanning of the originals for the 1st job starts.
6
After “Press START button to copy after changing settings.” appears,
place the originals of the 2nd job. Perform the settings for the 2nd job.
Note that copying will be performed in the same modes as those of the 1st job if the settings are not changed.
Press the [SETTINGS] button to confirm the settings.
7
Press the [START] button.
The scanning of the originals for the 2nd job starts.
Repeat steps 6 to 7 until all the originals have finished being scanned.
8
After all the originals have finished being scanned, confirm the num-
ber of copies on the menu and change if needed.