Filter
Top Products
292
9.BLINKING GRAPHIC SYMBOLS
5.Jam Symbols (Cont.)
9
Releasing a paper misfeed in the jam releasing cover
3
Return the jam releasing cover, the automatic duplexing unit and the
bypass tray to the original positions.
• Be sure to close both sides of the automatic duplexing unit firmly.
Releasing a paper misfeed in the fuser unit
Do not touch the fuser unit or the metal area around it. Since they are very hot, you could be burned or the
shock could cause an injury to your hand.
1
Make sure that the bypass tray and the
automatic duplexing unit are open. Put
your fingers into A, push it up to release
the lock and open the jam releasing
cover.
2
Rotate the green knob as indicated by
the arrow toward the inside and remove
any misfed paper.
1
Make sure that the bypass tray, the auto-
matic duplexing unit and the jam releas-
ing cover are open, and push down the 2
fuser pressure release levers until they
come to a stop.
Be sure to perform step 1 without fail.
A