Filter
Top Products
99
Mobile Computing
Changing the battery
5.375 x 8.375 ver 2.4.0
Removing the discharged battery
WARNING: If the battery is leaking or its case is cracked, put on
protective gloves to handle it, and discard it immediately following
the advice in “Disposing of used batteries safely” on page 100.
Inserting a charged battery
1 Wipe the terminals of the charged battery with a clean
cloth to ensure a good connection.
2 Insert the charged battery into the slot.
The battery has been designed so that you cannot install it
with reverse polarity.
CAUTION: If the battery does not slide into the slot easily, remove
the battery and try again. Avoid forcing the battery into position.
3 Turn the computer right side up and lock the battery into
place using the battery lock.
4 Reconnect any cables.
5 Restart the computer.