Filter
Top Products
19
ICC
7. Configuring the IP Address
Before you can access the interface from your web browser or begin using it as
a part of your automation network, you must know its IP address. The interface
comes from the factory configured to obtain an IP address dynamically
(DHCP/BOOTP). You can determine the interface’s current IP address using
the discovery software included on the CD provided with the interface, or
available from the ICC homepage at http://www.iccdesigns.com
.
7.1 Via the Finder Utility
To configure the interface to use a static IP address:
1. Connect the interface to your network and apply power to the ASD. When
the interface boots up, it will attempt to obtain an IP address from a DHCP
server or, failing that, will fallback to either the last static IP address
assigned, or a default static IP address of 192.168.16.102 if no static IP
address has yet been assigned.
2. To determine the initial IP address of your interface, start the ICC
FINDER.EXE discovery utility.
3. The discovery utility scans the network for ICC devices and then lists each
device’s IP Address, MAC Address, Firmware Version and Product ID.
Identify your device by its MAC address
(printed on a label on the top of
the Ethernet network jack). Refer to Figure 5.
Figure 5: ICC Finder Discovery Utility
4. To change the IP address, select the device in the list of detected devices
and click the Configure IP Settings button.