Filter
Top Products
74
ICC
Figure 73: Selecting the Destination Element
d) “Communication” tab settings (refer to Figure 74):
i) Enter the Path to the interface card. A typical path is formatted as
“Local_ENB,2,target_IP_address”, where:
• Local_ENB is the name of the 1756-ENBx module in the local
chassis (we named ours “EIP” in section 13.2.2),
• 2 is the Ethernet port of the 1756-ENBx module in the local
chassis, and
• target_IP_address is the IP address of the target node.
In our example, this path would be entered as
“EIP,2,192.168.16.128”.
Figure 74: Setting the Communication Path